Safety footwear for protection features can be divided into the following categories:
- Jan 06, 2017 -

(1), protection of the toe safety shoes: safety to AN1 of baotou, used in metallurgy, mining, forestry, port, decorations, gravel, machinery, construction, petroleum, chemical industry and so on.

(2), resistant to puncture of safety footwear: anti-puncture strength level 1, apply to mining, fire protection, construction, forestry work, cold, mechanical industries, etc.

(3), dielectric footwear: applicable to electrical, electronics operators, cable installers, installers, etc. Precautions: avoid contact with sharp, high temperature and corrosive substances, and bottom must not have corrosion damage.

(4), ESD safety shoes: eliminates static electricity to build up the body, apply to workplaces where flammable, such as gas station operators, LPG filling. Note: use prohibited when rubber shoes; wear anti-static shoes should not wear insulating wool thick socks or using the insulating insole; anti-static shoes and supporting the use of anti-static clothing; anti-static shoes the shoes should be not more than 200 hours resistance test, if the resistance is not within the specified range, it cannot be used as anti-static shoes.

(5), acid and alkali resistant safety shoes: used in electroplating, pickling and electrolytic, liquid, chemical operator, and so on. Note: acid and alkali resistant shoes only applies to low concentrations of General acid-base workplaces; should avoid contact with high temperature, leakage of sharps injury uppers or soles; rinse after wearing your shoes and acid-alkali liquid, and then dry, and avoid direct exposure to sunlight or drying.